wow, that was fast crappyhappy! guys, I just sent these pics to him a few minutes ago. thanks for doing that for me!!!! sorry for the double pic post. the top photo is the first mold I made with the flat head, pic three and four is the fly jig mold about 1/70oz. two cavities, last pic is the 1/70oz. roundhead on the left, it's the one I had a problem with getting too close to the cavity with the eyelet recess, the one on the right is the flathead mold and I made it with two threaded rods per handle using smaller 1/4" threaded rod, I did this because the brass pins are centered on the ends of the mold preventing the handle from being in the center, but I kinda like the brass pins in the center, instead of in the corners, might be my imagination but it seems like the pins find their respective holes easier. went to the neurologist this afternoon and they zapped me all over with electical zaps, to check my nerve damage in the legs and arms. then it was off to bass pro and gander mountain.