Egg Sinker mold

Fatman

Active member
Joined
May 1, 2011
Messages
10,525
Location
Northfield, Vermont
Melt had posted about looking for a small Egg sinker mold. This is an Old cast iron Palmer 453 - because both size's are under 1/2oz they cannot be used in Vermont.

100_1215.jpg

100_1216.jpg
 

Fatman

Active member
Joined
May 1, 2011
Messages
10,525
Location
Northfield, Vermont
Used to use either nails or pieces of coat hanger = once the lead hardened you'd pull the nails or coat hanger then open and pull out by the sprues.

 

meltleadalot2693

New member
Joined
Dec 20, 2011
Messages
198
Location
Nashivlle,TN
Thinking of buildin' a furnace to melt some aluminum cans and cast me a custom sinker mold. Just need to build the furnace and get some sand. Be neat to cast my own sinker mold.
 
Back
Top