Slab Stik'r 1/32 minnow

CrappieHappy

Moderator
Joined
Feb 7, 2011
Messages
5,281
Location
Midlothian, TX
I tyed up this 1/32 minnow using cross cut wabbit with flash, I also incorporated a lil flash in the thread neck, but it didnt come out as well as Russ' did...

99915c0d.jpg

786d4e40.jpg
 

ScottV

New member
Joined
May 14, 2010
Messages
1,942
Location
Collinsville, MS
I hope you tied at least a doz. of those. Make a good swap jig and one would look good on my jig pole. Nice work Heath.
 

AtticaFish

Administrator
Staff member
Joined
Mar 22, 2010
Messages
5,445
Location
Attica, OH
Looks good to me - perfect color even! :icon14:

If you want more of the flash in the thread, you can tie in more individual pieces of flash and just twist it all together with your thread. Keeping it all twisted tight while you wrap is a little tricky. Can't make too many loops when you tie it off either or you cover up your hard work. Still think yours looks good though - gives the impression of scales pretty well.
 

CrappieHappy

Moderator
Joined
Feb 7, 2011
Messages
5,281
Location
Midlothian, TX
AtticaFish said:
Looks good to me - perfect color even! :icon14:

If you want more of the flash in the thread, you can tie in more individual pieces of flash and just twist it all together with your thread. Keeping it all twisted tight while you wrap is a little tricky. Can't make too many loops when you tie it off either or you cover up your hard work. Still think yours looks good though - gives the impression of scales pretty well.

Thanks Russ.
 

Fatman

Active member
Joined
May 1, 2011
Messages
10,525
Location
Northfield, Vermont
You guys need to write this stuff down!!!!!!!!!!!!LOL When you twist the flash use a pair of hackle pliers to hold it makes it much easier!!!!!!
 
Back
Top