Uncle Grump
New member
- Joined
- Apr 20, 2010
- Messages
- 232
Here are some pics of some jigs and spinners I poured not so long ago....some of the pics aren't the greatest - cell camera w/ fixed focus.
The molds I used for these are all from Do-it - some were new purchases, and some used that I had picked up here on Jig Craft.
1/8th oz Swim jig - going to try these for crappie
1/16 and 1/8th oz Shad Darts
View attachment 1
3/8 oz Erie assortment - spinner bait, jigs and in-line spinners - all of these molds were used. The spinner bait mold was designed for straight wire, and I used a pre-bent form, so it took some wiggling and tweaking to get the hook and form lined up.
View attachment 2
In this pic are ball head in 1/64 and 1/80th oz. This was a new mold, and I was very happy w/ how these turned out - I was using hard lead (wheel weights). In this pic, the 2nd jig from the knot is 1/64 oz, the others are all 1/80.
View attachment 3
Some 1/32 oz tube jigs. These jigs and some others will be part of a gift pack I am putting together for the gas station owner who gave me the wheel weights that I used for this pouring session.
View attachment 4
The molds I used for these are all from Do-it - some were new purchases, and some used that I had picked up here on Jig Craft.
1/8th oz Swim jig - going to try these for crappie
1/16 and 1/8th oz Shad Darts
View attachment 1
3/8 oz Erie assortment - spinner bait, jigs and in-line spinners - all of these molds were used. The spinner bait mold was designed for straight wire, and I used a pre-bent form, so it took some wiggling and tweaking to get the hook and form lined up.
View attachment 2
In this pic are ball head in 1/64 and 1/80th oz. This was a new mold, and I was very happy w/ how these turned out - I was using hard lead (wheel weights). In this pic, the 2nd jig from the knot is 1/64 oz, the others are all 1/80.
View attachment 3
Some 1/32 oz tube jigs. These jigs and some others will be part of a gift pack I am putting together for the gas station owner who gave me the wheel weights that I used for this pouring session.
View attachment 4