LedHed said:
If the paint is usable when you agitate while the air is blowing through it - try using 1 part clear 3 part problem paint – might even try a 50/50 mix.
If you can get bottled nitrogen – that will dry it out.
You can also try small desiccant bags. Keep them in a warm dry place (re-charge) before you use them with your paint.
Thanks again for your help.
I've seen improvement with the plastic screen you sent.
Have tried to find out its make, but the best guess that was given to me was that it was a "filter cloth".
Never had or used any clear. Guess I need to get some.
Recommendations for where to buy?
Also, for the people using 3" cups, abouuuut how much paint are you using in the cup?
I've mixed a bunch of new colors in bigger batches that are prob. needed for the cup and am afraid I might be overloading the cup. I usually spoon 'em in lil by lil trying to find what works. Experimented a bunch and found smaller amts get a good movement but more volcanoes and that larger amts roll great when agitated. Just haven't found the happy medium and nail polish is giving me headaches.
Thanks for everyones help.
Adam