I just ordered and sent a flutter mold to one of the guys that pour my jigs. He also is pouring the shad body spoon for me you might have seen in the painting section.
Because each one as in size takes a different size wire I just ordered mine from zieners.
http://www.zeiners.com/doit/ccforms.html
They sell them in 100 packs and some in 25 packs. Due to using coil wire it isn't worth the time or lack there of quality for me to bend my own and straighten the wire. I bend a lot of wire and I can tell you up to .030 bending is easy but you get up in the .041- .051 the wire is much harder to get a uniformed bend unless you have a machine to bend the heavy wire with these 1 1 1/2 oz you need the heavy wire.
I have bent a few wires for my Erie molds and it works but you better have a tight bend if you want it to fit in the mold for the pour. Hence again why I buy all of my wires.
FM thanks for the link those are awesome prices on mass quantities of wire. I'll probably be stocking up soon.
Bo