Fatman
Active member
I've been asked how I cure the blades I paint after I do them.
first painting blades is pretty easy if you've done any brush tapping, heat the blade and tap the powder onto the blade, They'll look rough until they cure and smooth out.
I've posted my curing trays that I make from aluminum pans before. Here's the wire pegs I form for the blades to hang on
[/img]
Here's how they hang on my curing trays
And a side view, the newspaper is inside the tray because you can't see anything when the flash goes off.
first painting blades is pretty easy if you've done any brush tapping, heat the blade and tap the powder onto the blade, They'll look rough until they cure and smooth out.
I've posted my curing trays that I make from aluminum pans before. Here's the wire pegs I form for the blades to hang on
Here's how they hang on my curing trays
And a side view, the newspaper is inside the tray because you can't see anything when the flash goes off.