Lost Pole
New member
Dunno what exists mold wise b:c I just started pouring. Looking for a mold or molds. I need a Roundhead 1/4 oz and Roundhead 3/8 oz and Roundhead 1/8 oz. All with barbs n collars.
WTB
- Thread starter Lost Pole
- Start date
For Jig Molds, you can watch Ebay and find some bargains but be very careful with your bidding or you will pay as much or more for a used mold as you will for a new one from one of the following online vendors
Check out Zeiners http://www.zeiners.com/doit/jigmolds.html
or Barlows http://www.barlowstackle.com/Do-It-Round-Head-Jig-Molds--P194.aspx
Or for a premium Mold Jacobs http://stores.jacobsbaits.com/round-head-jig-molds/
Hooks, Captain Hooks http://www.captainhookswarehouse.com/index.cfm?page=products&catid=5&view=1
or best price Grandpa Bobs http://www.grandpabobscustomjigs.co...ath=60&zenid=c80d029d89f374545bc11c7e35898f7b
Check out Zeiners http://www.zeiners.com/doit/jigmolds.html
or Barlows http://www.barlowstackle.com/Do-It-Round-Head-Jig-Molds--P194.aspx
Or for a premium Mold Jacobs http://stores.jacobsbaits.com/round-head-jig-molds/
Hooks, Captain Hooks http://www.captainhookswarehouse.com/index.cfm?page=products&catid=5&view=1
or best price Grandpa Bobs http://www.grandpabobscustomjigs.co...ath=60&zenid=c80d029d89f374545bc11c7e35898f7b
JUNGLEJIM1
Well-known member
Do it has a mold with 1/8 and 1/4, four of each at a time. Model number RHB-8-48 Zeiners has the best price. You could get a 3/8 from there as well, pours 6 at a time, RHB-6-38. Check with Sonny, he might have doubles of those sizes in his collection. I have the 1/8 and 1/4 mold that I haven't used in awhile. I'd loan it to you if you pay the shipping.
Ron Don
Future Sponsor
What u pouring them big mammer jammers for?
Fatman
Active member
The RHB-8-48 is a good mold - it was one of the first ones I ever bought. there's one on ebay but it's hard to see the inside as they smoked it.
Just over 6 hrs. left and the shipping isn't bad
http://www.ebay.com/itm/Do-It-Mold-...720?pt=LH_DefaultDomain_0&hash=item1e9630dd88
On ebay I always ask for lot's of pics, and if they don't want to provide more skip it!! Then you'll have a few that will do a buy it now for $15 but the shipping is $20+ - as has already been said for that kind of money go to Zeiners and buy a new one!!!
Just over 6 hrs. left and the shipping isn't bad
http://www.ebay.com/itm/Do-It-Mold-...720?pt=LH_DefaultDomain_0&hash=item1e9630dd88
On ebay I always ask for lot's of pics, and if they don't want to provide more skip it!! Then you'll have a few that will do a buy it now for $15 but the shipping is $20+ - as has already been said for that kind of money go to Zeiners and buy a new one!!!
LedHed
Sponsor
Check your PM
Lost Pole
New member
Thx for the links and recommendations. KDOG.
Thx JJ1 and I appreciate the offer. I've learned many lessons borrowing. It doesn't work in my favor.
. I think imma try to make what I want. But I appreciate it.
Ronny,
You know I only fish for one fish.
literally……
I can only catch ONE fish.
Thx Doug but I can't pay attention long enough for eBay.
Hats off to y'all bidders.
Thx JJ1 and I appreciate the offer. I've learned many lessons borrowing. It doesn't work in my favor.
. I think imma try to make what I want. But I appreciate it. Ronny,
You know I only fish for one fish.
literally……
I can only catch ONE fish.
Thx Doug but I can't pay attention long enough for eBay.
Hats off to y'all bidders.
Lost pole, I have about 15 molds that I bought on Ebay for 1.00 plus 4.99 shipping, Brand new lil mac molds, I still see a few from the same place and you just gotta be patient. Couple times I had 2-3 molds and they combined shipping, Right now there are 10 jig molds listed plus a lot of sinker molds.
My favorite molds are the old hilts molds that occasionally crop up. Lots of old molds, never used show up. you gotta watch how they word their adds but I havent been burned yet.
My favorite molds are the old hilts molds that occasionally crop up. Lots of old molds, never used show up. you gotta watch how they word their adds but I havent been burned yet.
Bucko
New member
I have a couple 3/8 no collar molds. I could part with one.
Bucko
New member
Wait, my bad. You want collar and barb. Oops.