JUNGLEJIM1
Well-known member
While pouring some 1/8 spinnerbaits I found a 1/8 buzzbait and an idea came to me that with a couple modifications I could use the 1/8 spinnerbait slot to make some buzz baits. I used a diamond file to make the modification since I misplaced my two drills and it pours perfectly with no flashing at all even though the work wasn't pretty. I poured, painted and tied these up this morning. Used a 2/0 EC Lazer sharp Aberdeen as the hook. Didn't have any buzzbait rivets so had to borrow from a couple of other baits and then tried some using beads which seem to work ok. These were made using craft hair, silicone rubber or buck tail with some flash. View attachment 9View attachment 1View attachment 2
