Jigs

hookup

Well-known member
Joined
May 22, 2012
Messages
2,713
Location
VA
Woke this morning to snow, rain, cold, wind ... decided nah, not kayaking.

Wife has no honey-do chores, so got out the Lee Pouring Pot that I just replaced the pot on because the spout was clogged & decided to see if it worked.

First 100 pours were great, then it started leaking. Tried everything and only succeeded to get it to a slow drip, but still managed to pour another 100 jigs.

What you see here are 1/8, 3/16, and 1/4 oz tube jigs, 1/8 and 1/4 oz swim bait jigs, and 1/8 oz SWM jigs that are ready to get the slag cut off and then the SWM & swimbait jigs will get painted.

IMGP0926_zps52a9cbe3-1.jpg
 

hookup

Well-known member
Joined
May 22, 2012
Messages
2,713
Location
VA
I put the stopper rod in a drill, clamped the drill into a vice, then cleaned it off with various grits of wet fine silicone carbonate sand paper. It was smoother than a new borns baby's butt.
 
Back
Top