1 1/2 to 2 in crappie tube 3/16-1/4 oz mold?

jackie53

New member
Joined
Mar 13, 2014
Messages
230
Location
Greers Ferry Ark
Am looking for suggestion's on making/ modifying an inside tube jig mold.We currently us 1/16-1/8 oz inside tube jig heads.would like a heavier 3/16-1/4 oz.Can and use the jig heads on the outside of  tube." double barbed jig heads,super glue."worm A mold"" Ned rig "Jig head .The inside tube jighead is much more weedless especiallyl in water or brush piles deeper than 20'.The 3/16-1/4 oz that is alread made splits the tube.  Thanks
 

Hawnjigs

KISS
Joined
Mar 23, 2010
Messages
4,226
Location
Ogallala, NE
Simple mill job for a machine shop, but a ball cutter bit on a drill press might serve for a Do-it yourself extension of the stock head cavities. Longer shank narrower bite Gamakatsu light wire 114 hooks might be useful. eBay has some for good prices on 3,000 lots.
 
Back
Top