Best Mold for Tie Guys

Hawnjigs

KISS
Joined
Mar 23, 2010
Messages
4,226
Location
Ogallala, NE
Altho I'm pushing 100 molds practically all for others, for my own tying just one suffices for my limited needs . I would recommend these for a newbie pourer as not only a good start but useful tools for life.

In addition to the excellent Mustad 32833 heavy wire hooks the molds will also accept light wire hooks of appropriate sizes, shank bending to fit if needed. The exit angles of shanks from the hook slots don't matter as long as the molds properly close tightly. Of course there is a limit to fitment of over or undersize hooks deviating from Do-t specs.

Worth mentioning that I'm a full time cast & retrieve angler, and don't know if the slightly forward of center hook eye position could be detrimental for vertical hanging presentations.
 

hookup

Well-known member
Joined
May 22, 2012
Messages
2,698
Location
VA
I'm sure I have that mold still wrapped in the plastic it came in.

I use two molds equally for my fishing. Production 1/8th oz ballhead and a SWM mold heavily modified.
 

hookup

Well-known member
Joined
May 22, 2012
Messages
2,698
Location
VA
I'm not ready to unload any molds yet - but when I do, I'll post them on this site first

I've sent stuff to Scotland with no problems but the price of postage
 

Hawnjigs

KISS
Joined
Mar 23, 2010
Messages
4,226
Location
Ogallala, NE
Not like you had a choice since Matzuo tanked, and for a crappie hook Nastys are OK. I like #2 also for pinning 2" softies but prefer heavier wire for the lurking in the shadows nasties here.
 

Jig Man

Active member
Joined
May 19, 2010
Messages
5,523
Location
Out here...
I don't know, nasty's seem to hold up ok for shadow stuff... 34 lbs.

And I do have a choice with an inventory on hand.
 

Attachments

  • IMG_1200 (800x600).jpg
    IMG_1200 (800x600).jpg
    452 KB · Views: 5
Last edited:

Hawnjigs

KISS
Joined
Mar 23, 2010
Messages
4,226
Location
Ogallala, NE
Light wire hooks will practically always hold up to fresh water surprises, yesterday snagged a dorsal fin on a flattie bout the size of yours and the #2 Mustad 32746 got er dun tho took awhile to get close enuf to pull the hook. And yes, Lil Nastys feel pretty solid testing for bend out, tho not nearly as sturdy as 32833 2x.

Luckily had my 8# gear for the flattie surprise, my usual 4# for cold season canal would have been a chore chasing down current over steep rip rap bank.
 

skeetbum

Member
Joined
Aug 26, 2010
Messages
83
Location
Debary, FL
I’m using much smaller than you guys. Seems lately that I’m fishing as light as I can find braid and a 4 lb leader or 10lb braid with a 25lb leader in the salt. The fresh gets most of my stuff done on a #8 sickle that comes from a do it 1/32 pro mold at 1/43. Started with some Matzuos I had left from back in the day and now that they’re gone I’m having trouble finding more of that size. Ordered 500 from Barlows and got sixes labeled eights, I’m less than happy. But the little hooks are doing good work for me. If I get a solid point to bury the point I land the fish. Haven’t gotten any cats over about six pounds like you guys but my big tilapia that I posted about was extra tough. All on my little rods and hooks. If anyone knows a reliable source for #8 sickles I would appreciate a heads up. Thanks in advance.
 
Back
Top