Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Tinsel Jigs with Hydro
02-16-2013, 02:51 PM,
Tinsel Jigs with Hydro
I have had a few people ask how I like the clear cure goo. So let me address that first. The clear cure stuff is not going to do anything that epoxy won't do. But it is easier , faster and neater. It is also more expensive and requires that you buy an UV light to cure the mixture. Out of all their concoctions I like the hydro the best. It is the thinnest formula , cures the fastest. Since it almost like nail polish ( goes on with a brush ) it is easier for me to work with.
It cures tack free and really shines when done right.

These jigs are painted with glitter nail polish, and I covered the thread wrap in silver or gold holographic tinsel. Then sealed with the hydro. I sometimes prefer a jig with lots of flash. I think these will fit the bill. Almost like a gangsters babe showing all her bling.Big Grin

[Image: tinseljigg_zps0f249f48.jpg]
AKA- hays47
02-16-2013, 02:57 PM,
RE: Tinsel Jigs with Hydro
Very nice!!!!!!!!
02-16-2013, 03:06 PM,
RE: Tinsel Jigs with Hydro
Flash is definitely effective - more the better usually. Gangsta babes definitely attract my attention, if only for a few polite seconds.
02-16-2013, 09:37 PM,
RE: Tinsel Jigs with Hydro
Papa those are nice!!! I may have to try some of that. I tie one close to yours with out the sealer. Must say I like yours better than mine. The silver shad gray and white with the satin will take many big fat slab crappie. Very,very nice job.

02-16-2013, 10:21 PM,
RE: Tinsel Jigs with Hydro
Very good
02-17-2013, 12:58 PM,
RE: Tinsel Jigs with Hydro
Impressive work
02-17-2013, 05:21 PM,
RE: Tinsel Jigs with Hydro
Stunning!!!!!! Great job on those, tons of flash!!!!!
02-17-2013, 05:36 PM,
RE: Tinsel Jigs with Hydro
Really cool!
02-17-2013, 08:12 PM,
RE: Tinsel Jigs with Hydro
All look good. Everyone of those will do the trick. I will have to try the Hydro, that's one I don't have and I don't remember seeing it used before. Nice work Smile
02-17-2013, 11:01 PM,
RE: Tinsel Jigs with Hydro
Nice jigs papaperch...
>>>------------> Make It Count!!! <><

Possibly Related Threads...
Thread Author Replies Views Last Post
  Messing Around With Tinsel And Thread Pup 9 2,764 05-17-2016, 03:58 PM
Last Post: Pup
  1/80 with Hydro Goo plateboater 11 2,424 01-07-2015, 10:45 AM
Last Post: LedHed
  Hydro goo jigs RonDon inspired bigger is better! plateboater 12 2,561 04-23-2014, 07:01 PM
Last Post: plateboater
  Hydro goo and a new palomar plateboater 6 1,559 03-03-2014, 07:34 PM
Last Post: plateboater
  New Taper Head with Hydro Goo plateboater 10 2,126 04-22-2013, 09:34 AM
Last Post: StumpHunter

Users browsing this thread: 1 Guest(s)