Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
on the heavy side of belly spinners
05-25-2017, 05:07 PM,
on the heavy side of belly spinners
traded some custom jigs for steel plating work on my kayak. Was a good deal, the guy and his 2 friends tested them extensively on a 5 day fishing trip to northern norway.

16oz spire point jig with 12/0 big game hook, 8" sea witch skirting material. The STW 155 wire insert was oviously too weak but the best I could improvise a spinner blade arm with. Planning to switch to 1mm twisted feather steel which is about the maximum I can homeshop with my cordless drill (last picture).

The other two guys started out working large plastics like everybody else, but all 6 halibut (4 landed) and all 3 large cod over 100cm (up to 20kg) went for the Jigs tipped with 40cm long whole coalfish or cutbait. Bonus were several lumb of 7-8kg and a wolffish, both praised table fare.

- the nose ring for an extra treble, requested by my friend, was utterly useless. Large halibut gobbled the whole thing up, smaller ones where hooked with a 8/0 single hook stinger in the rear of the bait
- 8" hair was too long, it fouled badly
- the wire needs to be shifted forward, the guys had fouling issues with hair in the blade
- fluorescent hair did better than plain white, so did an extra spinner blade on top of the jig

[Image: 29299140uh.jpg]

[Image: 29299141fa.jpg]

[Image: 29299142tf.jpg]

[Image: 29299143tw.jpg]

[Image: 29299144ip.jpg]

[Image: 29299145we.jpg]

[Image: 29299146ph.jpg]

[Image: 29299147ql.jpg]

[Image: 29299148xq.jpg]
05-25-2017, 06:16 PM,
RE: on the heavy side of belly spinners
Nice seeing your jigs catching fish!!!!
05-25-2017, 09:56 PM,
RE: on the heavy side of belly spinners
cool . Every body that saw any of my big jigs always asked if I was going to haul hay with that damn thing . Hope you don't get the same kind of abuse .
Toad Frog Baits a nonprofit hobby . Dedicated to spending money when I shouldn't
Fish Forever Work Whenever ! The worst day fishing is better than the best day working.
05-26-2017, 10:02 AM,
RE: on the heavy side of belly spinners
Man, those guys are gonna eat good !

There's some sheet materials both natural fish skin and synthetiic that could partially skirt your floss.
05-26-2017, 10:20 AM,
RE: on the heavy side of belly spinners
Now that's what I call an impressive, well made HEFTY jig!! And the best underspin design I've ever seen !! Really nice,meaty fish ,too -absolute proof of that jigmaster's building skills!!
05-26-2017, 04:38 PM,
RE: on the heavy side of belly spinners
Thanks everybody!

Since hair jig crafting is virtually unheard of over here, I always bring a  Jig in the 8 oz+ range to fairs just to make clear that I`m not tying for the fly rod. Works a treat Cool

BTW I forgot to mention that I had to engrave a new eye about half an inch or so back in order to balance the jig.  The original spire point is slightly tilted up and leans into the blade, you can´t have that with underspins.
05-31-2017, 09:07 AM,
RE: on the heavy side of belly spinners
Very cool. Those are some large jigs and outstanding fish! It looks like it could be a tough area to fish and you guys are dressed for the cold... can see the snow on the mountains in the back and looks foggy and misty on every picture. Definitely does not look like weekend warrior fishing. Has to be fun painting those big jig heads, lots of room to play. : Co-Founder
06-01-2017, 07:19 AM,
RE: on the heavy side of belly spinners
Nice jigs & results

Looks cold with those suits one

Possibly Related Threads...
Thread Author Replies Views Last Post
  1/16 #6 Pic Heavy midnight 12 3,429 02-18-2017, 09:53 AM
Last Post: bucktail
  Some bigger belly spins moswampy 5 2,130 05-04-2016, 02:03 PM
Last Post: duffy
  Belly spin rookie quivira kid 13 2,897 02-03-2016, 02:01 AM
Last Post: Fin and Fur
  A couple custom spinners. QPassage 7 2,553 01-31-2016, 02:03 AM
Last Post: QPassage
  Belly Spin's jackie53 5 1,613 12-28-2015, 10:23 PM
Last Post: jackie53

Users browsing this thread: 1 Guest(s)