Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
1 1/2 to 2 in crappie tube 3/16-1/4 oz mold?
06-19-2016, 08:59 AM,
#1
1 1/2 to 2 in crappie tube 3/16-1/4 oz mold?
Am looking for suggestion's on making/ modifying an inside tube jig mold.We currently us 1/16-1/8 oz inside tube jig heads.would like a heavier 3/16-1/4 oz.Can and use the jig heads on the outside of  tube." double barbed jig heads,super glue."worm A mold"" Ned rig "Jig head .The inside tube jighead is much more weedless especiallyl in water or brush piles deeper than 20'.The 3/16-1/4 oz that is alread made splits the tube.  Thanks
Reply
06-19-2016, 12:24 PM,
#2
RE: 1 1/2 to 2 in crappie tube 3/16-1/4 oz mold?
Simple mill job for a machine shop, but a ball cutter bit on a drill press might serve for a Do-it yourself extension of the stock head cavities. Longer shank narrower bite Gamakatsu light wire 114 hooks might be useful. eBay has some for good prices on 3,000 lots.
Reply
06-19-2016, 05:15 PM,
#3
RE: 1 1/2 to 2 in crappie tube 3/16-1/4 oz mold?
I've modified many molds with a dremel & JB weld
Reply




Users browsing this thread: 1 Guest(s)