Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A Gummie Process
06-05-2013, 03:33 AM,
#1
A Gummie Process
First I pick a painted head and wrap a thread base from the head about 1/4"down the shank.
[Image: IMAG0958_zps2708806e.jpg]
Then I select the plastic I'll use (I prefer Crappie Thunder's because they have bulk & are fairly tuff but about any solid body plastic will do) and cut the tail off.
[Image: IMAG0967_zpscb67e6a9.jpg]
Thread the body onto the hook and apply a tiny drop of super glue to the thread base and push the plastic against the jighead.
[Image: IMAG0959_zps6d521292.jpg]
Clamp hook in vise and with forceps, push body towards the jighead and clamp it.
[Image: IMAG0960_zpsb17c2b28.jpg]
Wrap a thread base to the hook bend and tie in flash (I use 1 strand, doubled twice making 4 strands).
[Image: IMAG0962_zps3d18913c.jpg]
[Image: IMAG0963_zpsfd7cfa7c.jpg]
Pull & stack hackle barbules for tail and tie in, tie 2 half-hitches and cut thread.
[Image: IMAG0964_zpse156c1ce.jpg]
Apply a tiny drop of super glue to thread just below clamp.
[Image: IMAG0965_zpsebdeb78e.jpg]
Remove clamp and pinch & twist body to push plastic over thread/glue. Cut flash to desired length
[Image: IMAG0966_zpsdc6af3cc.jpg]
Pepop's Lake Palestine Jig's
My NEW web page is now online. Check it out!
Reply


Messages In This Thread
A Gummie Process - by Pepop - 06-05-2013, 03:33 AM
RE: A Gummie Process - by plateboater - 06-05-2013, 05:43 AM
RE: A Gummie Process - by Pup - 06-05-2013, 07:44 AM
RE: A Gummie Process - by StumpHunter - 06-05-2013, 08:08 AM
RE: A Gummie Process - by Uncle Grump - 06-05-2013, 08:43 AM
RE: A Gummie Process - by Pepop - 06-05-2013, 09:40 AM
RE: A Gummie Process - by Denton Pond Jumper - 06-05-2013, 12:38 PM
RE: A Gummie Process - by OhioOuchigan - 06-05-2013, 01:37 PM
RE: A Gummie Process - by bombora - 06-07-2013, 01:43 AM
RE: A Gummie Process - by toadfrog - 06-07-2013, 07:53 AM
RE: A Gummie Process - by Pepop - 06-07-2013, 01:19 PM
RE: A Gummie Process - by macon1 - 06-07-2013, 08:46 AM
RE: A Gummie Process - by LedHed - 06-07-2013, 01:24 PM

Possibly Related Threads...
Thread Author Replies Views Last Post
  Trying a little UV Gummie plateboater 12 1,406 05-28-2013, 05:40 AM
Last Post: plateboater
Tongue Started the Winter process hunter7711 13 1,691 11-12-2011, 12:09 AM
Last Post: Pup



Users browsing this thread: 1 Guest(s)